| After-sales Service: | We Provide After-Sales Service |
|---|---|
| Warranty: | 2 Years |
| Type: | Steel Plate |
| Standard: | ASTM, AISI, GB, JIS, DIN, BS |
| Certification: | ISO, RoHS, IBR |
| Surface Treatment: | Blackface |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Product introduction | ||||||||||||||||
| 20Crsteel is a low-alloy structural steel independently developed in China. | ||||||||||||||||
| Properties of 20Cr alloy steel: | 1. the performance of 30Cr higher than 15Cr and 20 steels 2. It has high strength and wear resistance, high hardenability and moderate cold deformation plasticity. 3. The machinability is good, the weldability is acceptable, and the toughness of steel decreases less during heat treatment. 4. It can still maintain high toughness when cooled by water. 5. It has overheating sensitivity, white spot sensitivity and temper brittleness tendency, and is mostly used after quenching and tempering, and can also be used in normalized or hot rolling supply state. |
|||||||||||||||
| 20Cr alloy steel uses: | As a special steel for mining support equipment-hydraulic support column, it has excellent toughness and mechanical properties. 27SiMn steel is mainly used in quenched and tempered state, and is used to manufacture hot stamping parts with high strength, toughness and good wear resistance. It is widely used to manufacture hydraulic props, high-pressure boilers and other equipment, and can also be used in normalized or hot-rolled state, such as crawler pins of tractors. | |||||||||||||||
| technical parameter | ||||||||||||||||
| typical | 20Cr alloy steel | |||||||||||||||
| GB standard | GB /T 3077-2015 | |||||||||||||||
| tensile strength | >=835 | |||||||||||||||
| yield limit | >=540 | |||||||||||||||
| Elongation after breaking (Δ 5/%) | >=10 | |||||||||||||||
| Typical product | Tractor track pin, etc. | |||||||||||||||
| Content of chemical elements (%) | ||||||||||||||||
| standard | ingredient | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | ||||||
| standard | minimum value | 0.18 | 0.17 | 0.5 | - | - | 0.7 | - | - | - | ||||||
| standard | maximum | 0.24 | 0.37 | 0.8 | 0.03 | 0.03 | 1 | 0.3 | 0.3 | 0.1 | ||||||
| Bengang special steel | ingredient | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | Ti | |||||
| Bengang special steel | minimum value | 0.18 | 0.17 | 0.5 | - | - | 0.7 | - | - | - | - | |||||
| Bengang special steel | maximum | 0.24 | 0.37 | 0.8 | 0.3 | 0.03 | 1 | 0.3 | 0.3 | 0.1 | 0.2 | |||||
| mechanical character | ||||||||||||||||
| Sample diameter d mm |
Heat treatment or condition | tensile strength σb Mpa |
yield limit σs Mpa |
Elongation after breaking or elongation δ % |
Section shrinkage ψ % |
hardness HBW |
Shock absorption energy KV2 J |
|||||||||
| d=25 | Quenching+tempering | ≥835 | ≥540 | ≥10 | ≥40 | ≤179 | ≥47 | |||||||||
1. Who are we?
Our headquarters is located in Shandong, China. Since 2002, we have been selling to the domestic market (40.00%), Northern Europe (8.00%), North America (7.00%), the Middle East (7.00%), Africa (6.00%), South America (5.00%), Southeast Asia (5.00%), East Asia (5.00%), South Asia (5.00%), Eastern Europe (3.00%), Western Europe (3.00%), Central America (3.00%), Southern Europe (2.00%), and Oceania (1.00%). There are about 101-200 people in our office.
2. How do we guarantee quality?
Pre-production samples are always available before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Aluminum plate, aluminum coil, aluminum foil, carbon steel, alloy steel, stainless steel, copper galvanizing, etc
4. Why should you buy from us instead of other suppliers?
ZhongYe Metal Products (Shandong) Co., Ltd. is a leading manufacturer of aluminum products and carbon alloy materials in China, with more than 20 years of experience. More than 160 experienced workers use German brand processing equipment for production.
5. What services can we provide?
Accepted delivery conditions: FOB, CIF, FAS, DDP, express, DES;
Accepted payment currencies: US dollar, Australian dollar, Euro and RMB;
Payment types accepted: T/T, L/C, MoneyGram, credit card, PayPal, Western Union remittance, cash;
6. After-sales service: 24-hour online maintenance guidance service.
Language: English, Chinese Other.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}