| Customization: | Available |
|---|---|
| After-sales Service: | We Provide After-Sales Service |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product introduction | ||||||||||||||||
| 35CrMo alloy structural steel has high static strength, impact toughness, high fatigue limit and higher hardenability than 40Cr. | ||||||||||||||||
| Properties of 35CrMo alloy steel: | 1. High creep strength and endurance strength at high temperature, 2. Long-term working temperature can reach 500ºC; 3. Moderate plasticity and poor weldability during cold deformation. 4. Low temperature to -110 degrees Celsius, with high static strength, impact toughness and high fatigue strength. 5. Good hardenability, no overheating tendency, small quenching deformation and acceptable plasticity during cold deformation. 6. Medium machinability, |
|||||||||||||||
| 35CrMo alloy steel uses: | It is used to manufacture important parts in various machines that bear impact, bending and high load, such as herringbone gears of rolling mills, crankshafts, hammer rods, connecting rods and fasteners, main shafts and axles of steam turbines, engine transmission parts, large motor shafts, Used as an important structural part working under high load, such as the transmission part of vehicles and engines; Rotor, main shaft, heavy load transmission shaft and large section parts of turbogenerator. |
|||||||||||||||
| technical parameter | ||||||||||||||||
| typical | 35CrMo alloy steel | |||||||||||||||
| GB standard | GB-35CrMo | |||||||||||||||
| American Standard | ASTM/AISI-4135 | |||||||||||||||
| European standard | EN-34CrMo4 | |||||||||||||||
| Japan | JIS-SCM435 | |||||||||||||||
| German standard | DIN EN/DIN-34CrMo4 | |||||||||||||||
| France | NF EN/NF-35CD4 | |||||||||||||||
| Typical product | Hammer bars, connecting rods, fasteners, | |||||||||||||||
| Content of chemical elements (%) | ||||||||||||||||
| ingredient | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | |||||||
| minimum value | 0.32 | 0.17 | 0.4 | - | - | 0.8 | - | - | 0.15 | |||||||
| maximum | 0.4 | 0.37 | 0.7 | 0.035 | 0.035 | 1.1 | 0.3 | 0.3 | 0.25 | |||||||
| mechanical character | ||||||||||||||||
| Sample diameter d mm |
Heat treatment or condition | tensile strength σb Mpa |
yield limit σs Mpa |
Elongation after breaking or elongation δ % |
Section shrinkage ψ % |
hardness HBW |
Shock absorption energy KV2 J |
|||||||||
| d=25 | Quenching+tempering | ≥980 | ≥835 | ≥12 | ≥45 | ≤229 | ≥63 | |||||||||
| comparison table | ||||||||||||||||
| China | Taiwan, China | Japan | South Korea | United States of America | International organization for standards | Germany | France | European standard | Russia | Sweden | Britain | |||||
| GB | ISC | CNS | JIS | KS | ASTM/AISI | UNS | ISO | DIN EN/DIN | W-Nr. | NF EN/NF | EN | Digital grade | GOST | SS14 | BS EN/BS | |
| 35CrMo 35CrMoV |
A30352 A31352 |
SCM435 | SCM435 SCM435H |
SCM435 | 4135 | G41350 | 34CrMo4 | 34CrMo4 | 1.722 | 35CD4 | 34CrMo4 | 1.722 | 35XM 35ХМФ |
2234 | 708A37 CDS13 |
|
1. Who are we?
Our headquarters is located in Shandong, China. Since 2002, we have been selling to the domestic market (40.00%), Northern Europe (8.00%), North America (7.00%), the Middle East (7.00%), Africa (6.00%), South America (5.00%), Southeast Asia (5.00%), East Asia (5.00%), South Asia (5.00%), Eastern Europe (3.00%), Western Europe (3.00%), Central America (3.00%), Southern Europe (2.00%), and Oceania (1.00%). There are about 101-200 people in our office.
2. How do we guarantee quality?
Pre-production samples are always available before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Aluminum plate, aluminum coil, aluminum foil, carbon steel, alloy steel, stainless steel, copper galvanizing, etc
4. Why should you buy from us instead of other suppliers?
ZhongYe Metal Products (Shandong) Co., Ltd. is a leading manufacturer of aluminum products and carbon alloy materials in China, with more than 20 years of experience. More than 160 experienced workers use German brand processing equipment for production.
5. What services can we provide?
Accepted delivery conditions: FOB, CIF, FAS, DDP, express, DES;
Accepted payment currencies: US dollar, Australian dollar, Euro and RMB;
Payment types accepted: T/T, L/C, MoneyGram, credit card, PayPal, Western Union remittance, cash;
6. After-sales service: 24-hour online maintenance guidance service.
Language: English, Chinese Other.
){kind=link}