| After-sales Service: | Provision of Service |
|---|---|
| Warranty: | Provision of Service |
| Type: | Seamless |
| Technique: | Hot Rolled |
| Material: | Stainless Steel |
| Surface Treatment: | Black |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Product introduction | ||||||||||||||||
| Seamless steel tube products for machining use tube blanks (mainly continuous casting blanks) as raw materials, which are heated and rolled into steel tubes by centering, piercing, continuous rolling and tension reduction units. At the same time, the supporting production equipment such as tube end thickening, pipe joint processing, tool joint processing, heat treatment, ultrasonic, magnetic flux leakage, eddy current, magnetic particle on-line flaw detector, spectrum and hardness tester can meet the various requirements of different users. | ||||||||||||||||
| Chemical composition of pipes for machining; | C 0.08~0.19 Mn 0.40~0.70 Si 0.17~0.37 S ≤0.035 P ≤0.035 Cr 0.40~0.70 Mo 0.40~0.55 Ni ≤0.30 |
|||||||||||||||
| Performance of pipes for machining; | Tensile strength)MPa:410~560 ~ 560 Yield point MPa:205 Elongation (%): 2 |
|||||||||||||||
| The purpose of the pipe for machining: | Compared with solid steel such as round steel, seamless steel pipe is lighter in weight when the bending and torsion strength is the same, and it is an economic cross-section steel, which is widely used to manufacture structural parts and mechanical parts, such as oil drill pipes, bicycle racks and steel scaffolding used in construction. | |||||||||||||||
| Tube for machining structure | |||||
| Variety classification | measure | Steel grade/brand | executive standard | application area | |
| Outside diameter (mm) | Wall thickness (mm) | ||||
| Structural pipe | 42~760 | 4~120 | 20#, 35#, 45#, Q345A/B/C/D, Q390, Q420, 25Mn, 27SiMn, etc. | GB/T 8162 | General structure with, Mechanical tube |
| Vehicle tube | 45~245 | 4~35 | 20Mn2,SAE1527,MZ410R,MZ530R,30Mn2,40Cr,45Mn2,etc. | YB/T5035, technical protocol |
Tube for automobile axle and automobile axle sleeve |
| Tube for die casting | DN200~DN1200 | 21CrMo10,21CrMo10-2,etc. | Q/OHAD030, technical protocol |
Centrifugal ductile iron pipe Tube die blank |
|
| Military pipe | 42~760 | 4~120 | 30Cr,40Cr,35CrNi1MoA,etc. | Military standards and agreements | Military tube |
| Pipe for geological drilling | 42~133 | 4~25 | DZ40,DZ55,STM-R780,DZ60,etc. | Q/OHAD006, GB/T 9808 , technical protocol |
Drilling pipe |
| Pipe for hydraulic prop | 42~760 | 4~120 | 20#,35#,45#,27SiMn,30MnNbRE,30CrMnSi,30CrMnSiA,etc. | GB/T 17396, technical protocol |
Making hydraulic equipment for coal mining, hydraulic cylinders and plungers for truck cranes. |
| Fluid conveying pipe | 42~760 | 4~120 | 20#,Q345,Q390,etc. | GB/T 8163, technical protocol |
Used as a tube for conveying fluid. |
1. Who are we?
Our headquarters is located in Shandong, China. Since 2002, we have been selling to the domestic market (40.00%), Northern Europe (8.00%), North America (7.00%), the Middle East (7.00%), Africa (6.00%), South America (5.00%), Southeast Asia (5.00%), East Asia (5.00%), South Asia (5.00%), Eastern Europe (3.00%), Western Europe (3.00%), Central America (3.00%), Southern Europe (2.00%), and Oceania (1.00%). There are about 101-200 people in our office.
2. How do we guarantee quality?
Pre-production samples are always available before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Aluminum plate, aluminum coil, aluminum foil, carbon steel, alloy steel, stainless steel, copper galvanizing, etc
4. Why should you buy from us instead of other suppliers?
ZhongYe Metal Products (Shandong) Co., Ltd. is a leading manufacturer of aluminum products and carbon alloy materials in China, with more than 20 years of experience. More than 160 experienced workers use German brand processing equipment for production.
5. What services can we provide?
Accepted delivery conditions: FOB, CIF, FAS, DDP, express, DES;
Accepted payment currencies: US dollar, Australian dollar, Euro and RMB;
Payment types accepted: T/T, L/C, MoneyGram, credit card, PayPal, Western Union remittance, cash;
6. After-sales service: 24-hour online maintenance guidance service.
Language: English, Chinese Other.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}