| Customization: | Available |
|---|---|
| After-sales Service: | We Provide After-Sales Service |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 20/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Spring steel refers to steel specifically used for manufacturing springs and elastic components due to its elasticity in quenched and tempered states. The elasticity of steel depends on its ability to undergo elastic deformation within a specified range, which allows it to withstand a certain load without permanent deformation after the load is removed. Spring steel should have excellent comprehensive properties, such as mechanical properties (especially elastic limit, strength limit, yield ratio), anti elastic reduction performance (i.e. anti elastic reduction performance, also known as anti relaxation performance), fatigue performance, hardenability, physical and chemical properties (heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc.). In order to meet the above performance requirements, spring steel has excellent metallurgical quality (high purity and uniformity), good surface quality (strict control of surface defects and decarburization), and precise appearance and size.
| spring steel | ||||||||
| Spring steel refers to the special alloy steel used to manufacture all kinds of springs and other elastic elements, and refers to the steel specially used to manufacture springs and elastic elements because of its elasticity in quenching and tempering conditions. | ||||||||
| Properties of spring steel | Spring steel has excellent comprehensive properties, Excellent metallurgical quality (high purity and uniformity), Good surface quality (strictly control surface defects and decarburization), Accurate shape and size. |
|||||||
| Classification of spring steel | Carbon spring steel The carbon content (mass fraction) of carbon spring steel is generally 0.62%~0.90%. According to its manganese content, it can be divided into general manganese content (mass fraction) (0.50%~0.80%) such as 65, 70, 85 and higher manganese content (mass fraction) (0.90~1.20%) such as 65Mn. alloy spring steel Based on carbon steel, alloy spring steel can improve the mechanical properties, hardenability and other properties of steel by adding one or several alloy elements appropriately, so as to meet the requirements for manufacturing various springs. The basic composition series of alloy spring steel are silicon-manganese spring steel, silicon-chromium spring steel, chromium-manganese spring steel, chromium-vanadium spring steel, tungsten-chromium-vanadium spring steel and so on. On the basis of these series, some brands have added alloying elements such as molybdenum, vanadium or boron to improve their performance in some aspects. In addition, some brands are selected as spring steels from other steels, such as high-quality carbon structural steel, carbon tool steel, high-speed tool steel and stainless steel. |
|||||||
| Technological properties of spring steel | Springs are used under impact, vibration or long-term stress, so spring steel is required to have high tensile strength, elastic limit and high fatigue strength. Technically, it is required that the spring steel has certain hardenability, is not easy to decarburize, and has good surface quality, that is, high-quality carbon structural steel with a carbon content of 0.6%-0.9%. Alloy spring steels are mainly Si-Mn series steels, whose carbon content is slightly lower, and their properties are mainly improved by increasing the silicon content Wsi. In addition, there are alloy spring steels of Yong, W and V.. In recent years, combined with the resources of China and according to the requirements of new technology for automobile and tractor design, a new steel with boron, niobium and molybdenum added on the basis of silicon-manganese steel has been developed, which prolongs the service life of the spring and improves the quality of the spring. |
|||||||
| Application example of spring steel | ||||||||
| 65, 70 and 85 steel grades | High strength, hardness and yield ratio can be obtained, but the hardenability is small, the heat resistance is not good, and the ability to bear dynamic load and fatigue load is low. It is widely used, but it is mostly used for small springs with low working temperature or relatively important large springs. Such as springs for automobiles, tractors, railway vehicles and general machinery. 65Mn has simple composition, better hardenability, comprehensive mechanical properties, decarbonization and other technological properties than carbon steel, but it is sensitive to overheating, has temper brittleness, is easy to crack after quenching, and has a low price and a large dosage. We can manufacture all kinds of small cross-section flat springs, round springs, clockwork, etc. We can also manufacture valve springs, spring rings, shock absorbers, clutch reeds, brake springs, etc. |
|||||||
| 55Si2Mn ,60Si2Mn ,60Si2MnA | Silicon content (Wsi) is high (the upper limit is 2.00%). High strength and good elasticity. Good stability against tempering. Easy to decarbonize and graphitize. The hardenability is not high. The main spring steels are widely used. Manufacture all kinds of springs, such as leaf springs, spiral springs of automobiles, locomotives and tractors, cylinder safety valve springs and some important springs working under high stress, and springs with serious wear. Because 55Si2MnB contains boron, its hardenability is obviously improved for the front and rear suspension springs and auxiliary springs of light and medium-sized cars. 55Si2MnB steel grade developed by China is better than 60Si2Mn steel in hardenability, comprehensive mechanical properties and fatigue performance. It is mainly used to manufacture leaf springs of medium and small cars, and has good application effect. It can also be used to make other leaf springs and spiral springs with medium cross-section size. |
|||||||
| 60Si2CrA 60Si2CrVA | High strength spring steel. High hardenability and good heat treatment process performance. Because of its high strength, after winding the spring, it is necessary to deal with and eliminate the internal stress in time to make an important large spring with large load. 60Si2CrA can be used to make steam turbine gland spring, regulating spring, condenser support spring, high pressure water pump disc spring and so on. 60Si2CrVA steel also makes extremely important springs, such as spring of conventional weapon's bullet hook and spring of crusher. | |||||||
| 55CrMnA | The outstanding advantage of 60CrMnA is its good hardenability, in addition, its hot workability, comprehensive mechanical properties and decarburization resistance are also good. Various important springs with large cross sections, such as large leaf springs and spiral springs of automobiles and locomotives, etc. | |||||||
| 60CrMnMoA | The hardenability is the highest among all kinds of existing spring steels. Mechanical properties, anti-tempering stability and so on are also good. Super-large springs used in large civil buildings, heavy vehicles, machinery and so on. The thickness of steel plate can reach more than 35mm, and the diameter of round steel can exceed 60mm. | |||||||
| 50CrVA | A small amount of vanadium improves elasticity, strength, yield ratio and elastic reduction resistance, refines grains and reduces decarburization tendency. The carbon content is small, and its plasticity and toughness are better than other spring steels. All kinds of important spiral springs with high hardenability and good fatigue performance are especially suitable for springs with high working stress amplitude and strict fatigue performance requirements, such as valve springs, nozzle springs, cylinder expansion rings, safety valve springs, etc. | |||||||
| 60CrMnBA | The hardenability is higher than 60CrMnA, and other flat springs, spiral springs and torsion springs with similar performance and larger size. | |||||||
| 30W4Cr2VA | High strength heat-resistant spring steel. Good hardenability. Heat-resistant springs with good high-temperature relaxation resistance and hot working performance, such as steam turbine main steam valve spring, gland spring, boiler safety valve spring, 400t boiler disc valve spring, etc. | |||||||
Product Application
The outstanding advantage of 60CrMnA 55CrMnA is its good hardenability. In addition, the hot working performance, comprehensive mechanical performance, and decarburization resistance are also good for various important springs with large sections, such as large leaf springs and spiral springs for automobiles and locomotives.
1. Who are we?
Our headquarters is located in Shandong, China. Since 2002, we have been selling to the domestic market (40.00%), Northern Europe (8.00%), North America (7.00%), the Middle East (7.00%), Africa (6.00%), South America (5.00%), Southeast Asia (5.00%), East Asia (5.00%), South Asia (5.00%), Eastern Europe (3.00%), Western Europe (3.00%), Central America (3.00%), Southern Europe (2.00%), and Oceania (1.00%). There are about 101-200 people in our office.
2. How do we guarantee quality?
Pre-production samples are always available before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Aluminum plate, aluminum coil, aluminum foil, carbon steel, alloy steel, stainless steel, copper galvanizing, etc
4. Why should you buy from us instead of other suppliers?
ZhongYe Metal Products (Shandong) Co., Ltd. is a leading manufacturer of aluminum products and carbon alloy materials in China, with more than 20 years of experience. More than 160 experienced workers use German brand processing equipment for production.
5. What services can we provide?
Accepted delivery conditions: FOB, CIF, FAS, DDP, express, DES;
Accepted payment currencies: US dollar, Australian dollar, Euro and RMB;
Payment types accepted: T/T, L/C, MoneyGram, credit card, PayPal, Western Union remittance, cash;
6. After-sales service: 24-hour online maintenance guidance service.
Language: English, Chinese Other.
){kind=link}