| Customization: | Available |
|---|---|
| After-sales Service: | We Provide After-Sales Service |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Alloy steel sheet
The steel plate is flat, rectangular and can be rolled directly or cut from a wide strip of steel.
According to the thickness of the steel plate, thin steel <4 mm (the thinest 0.2 mm), thick steel plate 4~60 mm, extra thick steel plate 60~115 mm.
Steel plate is divided into hot rolled and cold rolled according to rolling. The width of the sheet is 500~1500 mm; The width of the thickness is 600~3000 mm. The sheet is divided into ordinary steel, high quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. According to
professional use, there are oil drum plate, enamel plate, bulletproof plate, etc.; According to the surface coating, there are
galvanized sheet, tin sheet, lead sheet, plastic composite steel plate, etc.
| Product introduction | ||||||||||||||||
| 40CrNiMo steel is pearlite heat-resistant steel, which has high thermal strength (Δ b ≥ 440 MPa) and oxidation resistance at high temperature, and has certain hydrogen corrosion resistance. | ||||||||||||||||
| Properties of 40CrNiMoalloy steel: | 1. Poor weldability of steel 2. It has high thermal strength and oxidation resistance below 500~550°C, 3.It has good thermal pressure processing performance 4. It has high strength, high toughness, good hardenability, and stability against overheating, high sensitivity to white spots, and a tendency to temper embrittlement. |
|||||||||||||||
| 40CrNiMo alloy steel uses: | Used for manufacturing important quenched and tempered parts requiring good toughness, high strength, and large size.It can also be used for rotor shafts and blades with operating temperatures exceeding 400 ° C. In addition, nitriding treatment can be performed to manufacture important parts with special requirements. | |||||||||||||||
| technical parameter | ||||||||||||||||
| typical | 40CrNiMo alloy steel | |||||||||||||||
| GB standard | GB /T 3077-2015 | |||||||||||||||
| South Korea | _ | |||||||||||||||
| Japan | JIS- G 4053:2008 | |||||||||||||||
| France | - | |||||||||||||||
| Typical product | Production of seamless steel pipes and plates with various calibers. | |||||||||||||||
| Content of chemical elements (%) | ||||||||||||||||
| ingredient | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | |||||||
| minimum value | 0.12 | 0.17 | 0.4 | - | - | 0.8 | - | - | 0.4 | |||||||
| maximum | 0.18 | 0.37 | 0.7 | 0.035 | 0.035 | 1.1 | 0.3 | 0.3 | 0.55 | |||||||
| mechanical character | ||||||||||||||||
| Sample diameter d mm |
Heat treatment or condition | tensile strength σb Mpa |
yield limit σs Mpa |
Elongation after breaking or elongation δ % |
Section shrinkage ψ % |
hardness HBW |
Shock absorption energy KV2 J |
|||||||||
| d=30 | Quenching+tempering | ≥980 | ≥835 | ≥12 | ≥5 | ≤269 | ≥78 | |||||||||
1. Who are we?
Our headquarters is located in Shandong, China. Since 2002, we have been selling to the domestic market (40.00%), Northern Europe (8.00%), North America (7.00%), the Middle East (7.00%), Africa (6.00%), South America (5.00%), Southeast Asia (5.00%), East Asia (5.00%), South Asia (5.00%), Eastern Europe (3.00%), Western Europe (3.00%), Central America (3.00%), Southern Europe (2.00%), and Oceania (1.00%). There are about 101-200 people in our office.
2. How do we guarantee quality?
Pre-production samples are always available before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Aluminum plate, aluminum coil, aluminum foil, carbon steel, alloy steel, stainless steel, copper galvanizing, etc
4. Why should you buy from us instead of other suppliers?
ZhongYe Metal Products (Shandong) Co., Ltd. is a leading manufacturer of aluminum products and carbon alloy materials in China, with more than 20 years of experience. More than 160 experienced workers use German brand processing equipment for production.
5. What services can we provide?
Accepted delivery conditions: FOB, CIF, FAS, DDP, express, DES;
Accepted payment currencies: US dollar, Australian dollar, Euro and RMB;
Payment types accepted: T/T, L/C, MoneyGram, credit card, PayPal, Western Union remittance, cash;
6. After-sales service: 24-hour online maintenance guidance service.
Language: English, Chinese Other.
){kind=link}